Superpro 4×4 Control Arms

By
Updated: December 5, 2018

A fully adjustable solution – SuperPro 4×4 Control Arms.

SuperPro has the solution for your 4×4, their control arm kits. These kits have been designed to cover a large range of vehicles. Don’t waste time with any other control arm, get the perfect alignment solution from SuperPro.

With most people fitting bull bars, winches, larger tyres and rims to their 4×4 along with a lift in their suspension, there was a need for a product to correct the steering geometry. When most 4×4 vehicles are lifted above standard height they run out of camber and caster adjustment.

When you get a lift kit installed, you deserve the best. Why only have half the job done to correct your wheel alignment with a control arm that only offers static caster correction? Get the job done properly with SuperPro’s fully adjustable 4×4 control arms! These arms come with complete camber and caster control and are designed to give your 4×4 the best wheel alignment settings and increased clearance.

These arms are supplied with the camber and caster adjustable ball joints and are fitted with SuperPro bushings. The design of these control arms has removed the common issues usually faced with getting the correct alignment and clearance and they also reduce tyre wear and allow the safety of the vehicle to be maintained.

SuperPro worked with an OE (genuine part) manufacturer in Australia to ensure OE standards of manufacture and genuine quality were met. Not only are these arms made in Australia they are also made as tough as they could be to deliver a product to the market that eliminated the issues other arms on the market were facing, which included fatigue. This change in the design allowed SuperPro to place the adjustable ball joint in a more neutral position and increase the strength of the arm.

These arms were rigorously tested in-car before the release and the result of these tests was an expanded arm range that now delivers up +/- 2 degrees of camber adjustment and between 0-3 degrees of caster adjustment – allowing for the optimum alignment setting for a 2-inch lifted vehicle. So not only do these arms provide for better wheel alignment settings, better handling, steering and traction on and off road but also increased clearance between the arm and strut at full droop.

Don’t waste time with any other control arm, get the perfect alignment solution from SuperPro with these control arms that are built tough in Australia using high strength, OE grade Australian steel, are genuine quality for a lifted vehicle and are covered by the SuperPro warranty.

Key features include:

  • Increased articulation, perfect for the off-road environment
  • Provides for camber and caster adjustment
  • Increased clearance between spring and control arm at full articulation
  • SuperPro bushings
  • Made in Australia
For more information visit www.superpro.com.au