Automotive car products, Brakes, Drums, Pads, Rotors

Why track and sports cars go to Disc Brakes Australia

Offering invaluable advice through their Australian Customer Support Teams is one of the many ways Disc Brakes Australia helps you to get track ready.

In this article, we look at DBA’s advice on how to choose the best rotor if you are performing a brake change on a high performance car, or getting a customer’s car ready for track use.

SEE ALSO: How mechanics can win big

Choosing the correct brake setup is crucial to get a car track ready. Above all, you want to make sure you use a product that is fit for purpose. The aftermarket industry is very competitive and full of sales hype. However, fancy marketing slogans, extravagant product aesthetics or ‘bling’ are no substitute for performance.

Disc Brakes Australia has been manufacturing brake rotors for over 45 years in Sydney, Australia. Throughout that time, it has held strong connections with motorsport both at grassroots and professional levels. This commitment has resulted in countless hours of product testing through situations of extreme demand, including rally, endurance, and various other racing codes. Constantly testing the limitations of its rotors has resulted in continuous advancements in product performance and durability, which ultimately benefits DBA’s entire range of products – from OE-replacement to Performance.

“We’ve recently announced a significant partnership with Motorsport Australia, thus demonstrating our commitment to the Australian motorsport community and the Australian market.” DBA General Manager Phillip Joseph said. “This collaboration will allow us to work even more closely with motorsport teams across various categories and will enable us to continuously enhance our braking expertise and competence across our product range.”

“Being an Australian business with our own R&D, manufacturing and distribution puts us in the unique position of being extremely close to the action.” Added Phillip. “Our Product, R&D and Sales teams benefit greatly from liaising directly with the market by interacting with race teams and car enthusiasts alike, or by talking directly to our distributors and workshop customers.”

So, what determines the ‘right’ rotor for a high-performance car? Here are some of the main items to consider:

Temperature management

The two most important factors when it comes to brake rotors used in extreme applications are heat capacity and thermal stress management. Heat capacity design is a compromise between having sufficient metal mass in the friction ring to accept and process the kinetic energy transferred into the brake system to decelerate the vehicle and trying to minimise the rotating mass of the wheel assembly (unsprung weight).

DBA’s 4000 and 5000 SERIES upgrade performance rotors address both these issues. Their formula of XG-150 cast iron in combination with the patented ‘Kangaroo Paw’ internal pillar and post vent design offers optimal temperature properties, whilst the 5000 SERIES two-piece rotors minimise the unsprung weight by using ultra lightweight aluminium hats.

Image: Disc Brakes Australia

Thermal stress management is about minimising fatigue to prolong the life of the rotor. Regardless of the manufacturer or rotor design, grey cast iron will fatigue in high performance applications. The thermal expansion from heating and contraction when cooling initiates a stress and strain cycle which is essentially metal fatigue. It is therefore best practice by professional race teams and highly recommended to anyone driving their vehicle in extreme situations to regularly inspect their rotors, and discard them after a known period depending on conditions and application to avoid any unpredicted failures due to metal fatigue. Again, DBA upgrade performance rotors prolong the rotor’s safe use period by using one of the most advanced metallurgic composition available.

Surface design

Without question, when it comes to performance, track and racing applications, it is slotted rotors wherever possible. There are drivers that like to maintain the factory setup with plain face rotors, and this is o.k. Certainly the rotor shown opposite was a plain type due to the competition class requirements it was entered in.

The purpose of slots in the brake rotor is to evacuate the waste material (dust) from the friction surfaces. The slots will ensure consistent friction performance throughout the life of the brake rotor and pad, whereas more scrutiny is required in friction material selection with plain surfaces to avoid surface glazing and declining friction performance.

This leaves us with drilled or drilled and slotted.

Drilled brake rotors are not recommended for high-performance or track use of any kind, as the drill holes are focus points where stress and fatigue will accelerate and eventually result in crack formation.

Drilled rotors have proven to improve braking performance on the street where normal driving conditions rarely exceed 250ºC and stress is not a concern, however especially in motorsport applications drilled rotors are to be avoided.

This is where DBA’s 4000 and 5000 SERIES rotors come in. With their patented T3 slots they offer the perfect design for race and track applications.

Image: Disc Brakes Australia

Thermal stability

There are several treatments or processes applied to brake rotors marketed in the industry to achieve thermal stability, but not all of them lead to the same outcome. DBA’s 4000 and 5000 SERIES rotors undergo prolonged heat cycles under strictly controlled conditions, known as Thermal Stability Profiling (TSP), to relieve any internal stresses sustained from the manufacturing processes. This ensures maximum thermal stability and reduced metal fatigue in extremely high demanding applications.

In summary, while there are many options available in the market to fit to high-performance vehicles, trusting DBA with its nearly 50 years of local development and manufacturing experience gives you and your customers the peace of mind, when performance really matters.

For further information call DBA’s Customer Support Team  on 1800 730 039 and speak to one of their technical product managers, or get in touch via or via Facebook at DBAofficial.

Send this to a friend